To round out our showerhead blog earlier this month, Brandon Sheck, Plumbing Wonder and Brilliant Bathroom Remodeler from G&C Plumbing and Heating, is following up on his dad’s impressive knowledge of showerhead history with some input on water conservation and water conserving showerheads on the market today.
WaterSense and the Showerheads
According to the EPA, showering accounts for nearly 17 percent of residential indoor water use for the average family. To help with water conservation, the EPA developed the Watersense label in 2006 as a voluntary program for manufacturers. “The EPA provided specifications for water efficient products and if a manufacturer meets those specifications, the product is eligible for third-party testing, and then rewarded with the right to put the WaterSense label on that product,” said the Brandon.
Standard showerheads use 2.5 gallons of water per minute (gpm). Watersaving showerheads that earn the WaterSense label must use no more than 2.0 gpm. “The WaterSense label is also supposed to ensure that the products provide a “satisfactory shower” that is equal to or better than conventional showerheads,” said Brandon.
A “satisfactory shower” is determined by a showerhead’s water coverage and spray intensity. To compensate for using less water, which naturally results in less intensity, “showerhead designers found it beneficial to aerate their sprays to compensate for the smaller holes in the showerhead,” said Brandon. This resulted in some showers feeling more like a mist then a spray which can feel “less wet.” “Although, some people actually enjoy the misty feeling, so it’s become a bit of a personal choice when selecting a water conserving showerhead,” said Brandon. The following are a few he suggests to clients when they are remodeling their bathroom and want to incorporate a Watersense Certified showerhead:
Nebia “The device uses a water dispersion system adapted from the agricultural industry to release a thick mist,” said Brandon who stresses that this showerhead may not be for everyone because even the website describes the Nebia as “akin to stepping into a cloud.” But, if you are looking for maximum water conservation, the Nebia uses just .75gpm on its normal setting and only slightly more on its high-pressure setting.
High Sierra This is a more traditional water conservation showerhead found in many of the newer bathrooms today. The Sierra has a pivoting head which allows people to focus the water where they’d like. “With only a 1.5gpm, this low flow showerhead feels a lot like a traditional showerhead, but with some serious water conservation,” said Brandon.
Speakman Retraction Another traditional design, this retraction showerhead pulsates to simulate the feeling of high pressure. “It does a good job recreating the traditional showerhead feeling,” said Brandon. The design has a single function spray setting that concentrates water pressure with a turbine-powered engine. It is also WaterSense Certified at 1.5gpm.
Delta Showerheads with H2O Kinetic Technology “These showerheads make a wave pattern which simulates the feeling of being splashed to create more pressure,” said Brandon. Inside the showerhead, water is channeled through a series of chambers that generates velocity and sculpts the water into a wave pattern. “The good news is, there are no internal moving parts inside the head that will break or degrade over time,” said Brandon.
The showerheads above each provide a unique shower experience that some people might enjoy, and others may not. As for Brandon, he’s a fan of that traditional shower feeling that delivers maximum spray intensity and a satisfying wet feeling. If you want to learn more about the various showerhead options out there, give the guys at G&C a call and they’ll gladly give you their two cents on any questions you have. And, if you are thinking about remodeling your bathroom, G&C can take care of the whole thing for you!