Since Brandon and Greg Sheck from G&C Plumbing and Heating started offering up free professional tips here on their Plumbers Without Cracks blog, the guys have been flooded with questions when they run into customers at service visits, wholesaler outlets, even at dinner. “I love it,” said Grand Master Plumber, Greg. “The more our customers know, the more we can actually help them.”
So, it’s no surprise that when Greg was out to dinner with his lovely wife, Christine (Yes, she is the C in G&C – isn’t it romantic?) A customer, who had the guys install a new heating system last year, had this to ask from the next table:
“Hi Greg, I am planning to call you in a few years to remodel our kid’s bathroom, but I think it has some life left in it for now. One problem I am having is with the caulk around the tub, it’s all dingy. Do you think I could handle fixing it myself?”
The customer’s wife looked over her husband’s shoulder and mouthed to Greg, “He doesn’t know how to do it.” So, here is the answer Greg gave to the father of two kids who love to splash in the tub every night:
You can totally do it – Here’s How!
The entire process, from start to dried caulk, should take about four hours, so make sure you pick a time when no one needs to bathe. 5:00 p.m. on a school night is probably not the best time. I suggest a late Sunday morning so you can catch the afternoon game with a sense of accomplishment.
Head out to your local hardware store and get a quality caulk gun – about $20. You’re also going to need a couple tubes of 100% silicone caulk made for bathrooms – It should say something about containing mold and mildew prevention additives. You can get latex caulk, it’s easier to clean up, but latex will not last as long as silicone. You’ll have your choice of white, almond and clear at all hardware stores. You can also order custom colored caulk at some home centers. Tile stores often have a variety of options.
Other things you’ll need from the store or your garage:
Single-edge razor blades
Course sponge or rags
(An oscillating tool with a flexible scraper blade is very handy, but you can do the job without it)
Step one – Remove the old caulk
Prepping the surface for new caulk is over half the battle for this project. You need to properly clear away the old before the new will work. If not, your caulk job will look horrible no matter how steady your hand is. A Horrible caulk job can mess up the look of an entire bathroom. To get it right:
Slice through the old caulk along the walls with a utility knife (or with that oscillating scraper blade, if you splurged) Then scrape along the tub or shower floor
Scrape off as much caulk as possible
Apply caulk remover to loosen what remains
Scrape the remains off
Remove any loose grout between the walls and the tub or shower floor
If you notice mold under the grout along the wall and tub gap, kill it with bleach
Scrub the grout, rinse off the bleach and let it dry – Use a hair dryer to speed the drying
Clean the surfaces one last time with mineral spirits
Let dry for 10 minutes – Maybe catch some of the pre-game show.
Step two – Mask the gap
Start by finding the largest gap between the tub/shower and the walls. That gap dictates how far apart you must space the two rows of tape.
Mask the wall corner gaps first
Apply tape to the walls above the tub or shower floor
Apply tape to the tub or shower floor
Step three – Apply the caulk bead
Load the caulk tube into the gun and cut the nozzle tip at a blunt 20-degree angle that is the same width as the gap you marked off with your tape – You can actually stick the uncut tip in the gap to see where the cut should be
Hold the gun at a 90-degree angle to the gap and push a bead of caulk slightly ahead of the nozzle as you push the gun forward and continue applying pressure
Step four – Shape the bead
Wet your finger with water and, starting at the outer corner, wipe your finger across the caulk to create a rounded bead
Remove excess caulk from the gap
Clean off your hands
Remove the masking tape while the caulk is still wet
Let the caulk dry (cure) before using the tub or shower – About four hours
Go watch the game!
“Wow, thank you,”
the man said as he ordered a round of desserts for the now table of four. Then, Greg dropped his biggest tidbit of the night…
“When we remodel your bathroom, the showers we use don’t even have caulk and you’ll never have to do this again.”
You could see the mega mind explosions happening at the other end of the table. “No caulk what so ever?” the man’s wife whispered. “None,” Christine beamed.
(More on that next month)
If you have any plumbing or heating questions, feel free to comment on this blog or on Facebook – The guys would love to hear from you!